Dynatek dalta   105 East 4th Street  Galena, MO 65656   1.417.357.6155   1.800.325.8252   Fax 1.417.357.6327
copyright© 2005 Dynatek dalta

# 001
A New Technique to Determine Vascular Compliance In Vivo
Abstract
National Heart, Lung, and Blood Institute, 1989
Presented by James C. Conti
# 002
The Effective Measurement of Dynamic Internal Compliance of Vascular Grafts
Abstract
Association for the Advancement of Medical Instrumentation, 1990
Presented by James C. Conti
# 003
The True Flow Calibration of Ultrasound Diagnostic Instruments
Abstract
Association for the Advancement of Medical Instrumentation, 1990
Presented by James C. Conti
# 004
Current Process Towards Stentless Heart Valve Testing
Presentation Slides
Food and Drug Administration, 1990
Presented by James C. Conti
# 005
Measuring the Dynamic Compliance of Vascular Grafts
Presentation Slides
Food and Drug Administration, 1990
Presented by James C. Conti
# 007
Experimental Considerations that Determine the Utility of Accelerated Durability Testing for Prosthetic Heart Valves
Abstract
Food and Drug Administration, 1990
Presented by James C. Conti # 008
Accuracy of Measurements of Flow Velocity by Pulsed and Continuous Wave Doppler Echocardiography: An In Vitro Study
Abstract
American Heart Association, 1992 Scientific Sessions
Presented by Takahiro Shiota (David Sahn) # 009
Flow Acceleration Towards & Into a Long Segmental Stenosis: Spatial Movement of the Vena Contracta: An In Vitro Study using Digital Color Doppler
Abstract
American Heart Association, 1992 Scientific Sessions
Presented by Takahiro Shiota (David Sahn) # 010
Standardization of Doppler Echocardiographic Signals
Abstract
American Heart Association, 1992 Scientific Sessions

# 011
Doppler Ultrasound Calibration Instrumentation & Protocols for Quality Assurance
Abstract
Euroson, 1993

# 012
Accuracy of Measurements of Flow Velocity by Pulsed and Continuous Wave Doppler Echocardiography: An In-Vitro Study
Abstract
American College of Cardiology, 1993 Scientific Session
Presented by Takahiro Shiota # 013
Fluid Hemodynamics & Ultrasound Physics
Presentation Slides
GOUS, 1995
Presented by James C. Conti
# 014
Relating the Frequency Dependent Radial Compliance to the Tensile Modulus of Polyurethane and Latex Vascular Grafts
Abstract
Society for Biomaterials, 1996 World Biomaterials Congress
Presented by James C. Conti # 015
Dynamic Texture Analyzer (Virtual Chewer) Addresses Poor Sensory Panel / Instrument Correlation
Abstract
Institute of Food Technologists, 1996 Annual Meeting
Presented by James C. Conti # 016
Use of a Precise and Portable Flow Standard to Improve the Accuracy of Medical and Scientific Laboratory Flow Measurements
Abstract
Southern Biomedical Engineering, 1997 Conference
Presented by James C. Conti # 017
Cyclic vs. Single-pull Peel Testing: Influence on the First Yield Point of a Pressure-Sensitive Adhesive
Abstract
Adhesion Society, 1997 Conference
Presented by Eran Jones # 018
Frequency Dependent Radial Compliance of Latex Tubing
Abstract
Rocky Mountain Bioengineering Symposium, 1997 Annual Conference
Presented by James C. Conti
# 019
Barbs on Vascular Stents: A Three-part Protocol to Evaluate Durability
Abstract
Society for Biomaterials, 1997 Annual Meeting
Presented by James C. Conti
# 020
High-Speed Vascular Graft Testing: The Influence of Varying Structural Characteristics of Polyurethane and Natural Rubber Arterial Substitutes
Abstract
Society for Biomaterials, 1997 Annual Meeting
Presented by James C. Conti # 021
The Dynamic Texture Analysis of Mozzarella Cheese: Effects of Chewing Rate & Dwell Time
Abstract
Institute of Food Technologists, 1997 Annual Meeting
Presented by James C. Conti # 022
Evaluation of the Dynamic Mechanical Properties and Fatigue Resistance of Vascular Grafts
Abstract
FIICMSSM, 1997 Conference
Presented by James C. Conti # 023
State of the Art Stent Testing: A Review of Protocols, Concerns, and Considerations for the End User
Abstract
The Society for Cardiac Angiography and Interventions, 1997 Annual Scientific Session
# 024
Cardiovascular Considerations
Presentation Slides
Food and Drug Administration, 1997 Presentation
Presented by James C. Conti
# 025
Accelerated Mechanical Testing
Presentation Slides
Society for Biomaterials, 1997 Annual Meeting
Presented by James C. Conti
# 026
Dynamic Peel Analysis Demonstrates Package Seal Failure not Predicted by Standard-Peel Tests
Abstract
Adhesion Society, 1998 Annual Meeting
Presented by James C. Conti # 027
The Design and Laser Evaluation of a Pulsatile Flow Standard
Abstract
Southern Biomedical Engineering Conference, 1998 Annual Meeting
Presented by James C. Conti
# 028
The Design, Fabrication and Characterization of Mock Latex Aorto-Iliac Bifurcations
Abstract
Society for Biomaterials, 1998 Annual Meeting
Presented by James C. Conti
# 029
Mock Arterial Compliance: Influence of Hydration, Temperature, Mandrel Location, Age, and Lot
Abstract
Society for Biomaterials, 1998 Annual Meeting
Presented by James C. Conti # 030
Current Trends in the Durability and Fatigue Testing of Medical Products
Abstract
Society for Biomaterials Workshop, 1998 Annual Meeting
Presented by James C. Conti
# 032
Design Considerations for the In Vitro Testing of Cardiovascular Prosthesis
Document
International Society for Artificial Organs, 1986 Annual Meeting
Presented by Elaine R. Strope
# 034
The Dynamic Texture Analysis of Mozzarella Cheese: Evaluating the Rate of Texture Change (ROTC)
Abstract
Institute of Food Technologists, 1998 Annual Meeting
# 035
Sources of Error in Monitoring High-Speed Testing of Vascular Grafts
Abstract
Rocky Mountain Bioengineering Symposium, 1998 Annual Conference
Presented by James C. Conti
# 036
Self Assurance to Quality Assurance: Knowing the Correct Things to Do
Article
Southeastern Medical Publications
Presented by James C. Conti
# 037
A New Adhesive Joint Test Suggest Failure Unpredicted by Standard Test Methods
Manuscript
Society of Manufacturing Engineers, 1998 Annual Meeting
Presented by James C. Conti
# 038
Cyclic Peel Evaluation of Sterilized Medical Packaging
Abstract
Adhesion Society, 1999 Annual Meeting
Presented by James C. Conti
# 039
High Frequency Testing of Nitinol Stent Material
Abstract
Society for Biomaterials, 1999 Annual Meeting
Presented by James C. Conti
# 040
High Frequency Testing of Grafts and Mock Arteries for Stents: Influence of Testing Frequency on Durability
Abstract
Society for Biomaterials, 1999 Annual Meeting
Presented by James C. Conti # 041
Current Trends in the Durability Testing of Medical Products
Abstract
Society for Biomaterials Workshop, 1999
Presented by James C. Conti
# 042
The High Frequency Testing of Vascular Grafts and Vascular Stents: Influence of Sample Dimensions on Maximum Allowable Frequency
Abstract
Rocky Mountain Bioengineering Symposium, 1999 Annual Conference
Presented by James C. Conti # 043
The Cyclic Texture Profile Analysis of Mozzarella Cheese: Evaluating the Rate of Textural Change (RTC)
Abstract
Institute of Food Technologists, 1999 Annual Meeting
Presented by James C. Conti # 044
The Durability Testing of Porous Bifurcated Stent / Grafts Without Restricting
Leakage
Abstract
Society for Biomaterials, 2000 Annual Meeting
Presented by James C. Conti # 045
Determining the Hydrodynamic Characteristics of Unfixed Human Heart Valves: Effect of the Properties and Geometry of the Recipient Synthetic Aorta
Abstract
Society for Biomaterials, 2000 Annual Meeting
# 046
Cyclic Peel Testing of the Release of Silicone Products from Molds
Abstract
Adhesion Society, 2000 Conference
Presented by James C. Conti
# 047
Evaluating the In Situ Loading and Accelerated Durability of Barbs Located on Aortic Stent Grafts
Manuscript
Rocky Mountain Bioengineering Symposium, 2000 Annual Conference
# 048
The Durability of Silicone Versus Latex Mock Arteries
Abstract
Instrument Society of America, 2001 Annual Symposium

# 049
Radial Compliance of Natural and Mock Arteries: How this Property Defines the Cyclic Loading of Deployed Vascular Stents
Abstract
Rocky Mountain Bioengineering Symposium, 2002 Annual Conference
Presented by James C. Conti # 050
High-Speed Photographic Verification of Intervascular Stent Strains During Accelerated Durability Testing
Manuscript
Rocky Mountain Bioengineering Symposium, 2004 Annual Conference
Presented by Brunda Kattekola # 051
Frequency Dependent Hysteresis for Silicone and Latex Mock Arteries Used in Stent Testing
Manuscript
Rocky Mountain Bioengineering Symposium, 2005 Annual Conference
Presented by Rajesh Ramesh # 052
Comparing Several Analytical Methods When Determining Dynamic Compliance of Arteries and Vascular Grafts
Manuscript
Society for Biomaterials, 2005 Annual Meeting
Presented by Rajesh Ramesh # 053
Single Versus Double Ended High Frequency Pressurization of Mock Arteries: Symmetry of Expansion
Manuscript
Rocky Mountain Bioengineering Symposium, 2006 Annual Conference
Presented by Rajesh Ramesh # 054
Mock Vascular Compliance During Intravascular Product Testing
Presentation Slides
Society for Biomaterials Workshop, 2002
Presented by James C. Conti
# 055
How Accurate Doppler Ultrasound Can Reduce Health Care Costs and Increase Patient Safety
Abstract
Administrative Radiology, 1993
Presented by James C. Conti # 056
Standardization of Doppler Echocardiographic Signals
Abstract
American Society of Echo Cardiography, 1990
Presented by James C. Conti
# 057
Mock Artery Distension: Comparison of Optical, Mechanical and Theoretical Results
Manuscript
Rocky Mountain Bioengineering Symposium, 2007 Annual Conference
Presented by Rajesh Ramesh
# 058
Linear Elastic Mechanics of Mock Arteries: Empirical Versus Theoretically Predicted Pulsatile Stent Deflection
Manuscript
Rocky Mountain Bioengineering Symposium, 2007 Annual Conference
Presented by Rajesh Ramesh
# 059
A Comprehensive Protocol and Procedural Considerations Designed to Evaluate the Shedding of Particles from Drug Eluting Stents
Manuscript
Materials & Processes for Medical Devices, 2007 Conference
Presented by James C. Conti
# 060
Comparison of Radial Expansion of Stents Within Mock Vessels Molded with a Target Bent Radius Versus Straight Mock Vessels Bent to a Target Radius
Manuscript
Rocky Mountain Bioengineering Symposium, 2008 Annual Conference
Presented by Rajesh Ramesh